Publications

  Area of Laser Processing and Biomedical Applications:

Study of the laser-induced forward transfer of liquids for laser bioprinting
M. Duocastella, M. Colina, J.M. Fernández-Pradas, P. Serra, J.L. Morenza
Applied Surface Science, 253, 7855 7859 (2007)

Laser direct-write techniques for printing of complex materials
C.B.Arnold, P.Serra, A.Piqué
MRS Bulletin, 32, 23-31 (2007)

Growth of large microcones in steel under multipulsed Nd:YAG laser irradiation
S.I.Dolgaev, J.M.Fernández-Pradas, J.L.Morenza, P.Serra, G.A.Shafeev
Applied Physics A: Materials Science and Processing, 83, 417-420 (2006)

Influence of preheating and hematite content of clay brick pavers on the characteristics of lines marked with a Nd:YAG laser
J.W.Restrepo, J.M.Fernández-Pradas, M.A.Gómez, P.Serra, J.L.Morenza
Applied Surface Science, 253, 2272–2277 (2006)

Laser-induced forward transfer of liquids: study of the droplet ejection process
M.Colina, M.Duocastella, J.M.Fernández-Pradas, P.Serra, J.L.Morenza
Journal of Applied Physics, 99, 084909-1-7 (2006)

Marking of lines on clay brick pavers by vitrification with a Nd:YAG laser
J.W.Restrepo, J.M.Fernández-Pradas, M.A.Gómez, P.Serra, J.L.Morenza
Journal of Laser Applications, 18, 156-160 (2006)

Laser-induced forward transfer: a direct-writing technique for biosensors preparation
P.Serra, J.M.Fernández-Pradas, M.Colina, M.Duocastella, J.Domínguez, J.L.Morenza
Journal of Laser Micro/Nanoengineering, 1, 236-242 (2006)

Droplet ejection through laser-induced forward transfer for biomolecules microarrays printing
M.Duocastella, P.Serra, J.M.Fernández-Pradas, M.Colina, J.L.Morenza
On line Proceedings of the 4th International Congress on Laser Advanced Materials Processing, I.Miyamoto (ed.), Japan Laser Processing Society, 2006, com. 6-22, http://www.jlps.gr.jp/en/proc/lamp/06/

Analysis of the interface between a pulsed laser deposited calcium phosphate coating and a titanium alloy substrate.
J.M.Fernández-Pradas, M.V.García-Cuenca, J.L.Morenza
Applied Physics A: Materials Science and Processing, 80, 325-331 (2005)

DNA deposition through laser-induced forward transfer
M.Colina, P.Serra, J.M.Fernández-Pradas, L.Sevilla, J.L.Morenza
Biosensors and Bioelectronics, 20, 1638-1642 (2005)

Laser-induced growth of titanium nitride microcolumns on biased titanium targets
E.György, A. Pérez del Pino, P.Serra, J.L.Morenza
Journal of Materials Research, 20, 62-67 (2005)

Structure formation on titanium during oxidation induced by cumulative pulsed Nd:YAG laser irradiation
E.György, A. Pérez del Pino, P.Serra, J.L.Morenza
Applied Physics A: Materials Science and Processing, 78, 765-770 (2004)

Laser direct writing of biomolecule microarrays
P.Serra, J.M.Fernández-Pradas, F.X.Berthet, M.Colina, J.Elvira, J.L.Morenza
Applied Physics A: Materials Science and Processing, 79, 949-952 (2004)

Preparation of functional DNA microarrays through laser-induced forward transfer
P.Serra, M.Colina, J.M.Fernández-Pradas, L.Sevilla, J.L.Morenza
Applied Physics Letters, 85, 1639-1641 (2004)

Chemical composition of dome-shaped structures grown on titanium by multi-pulse Nd:YAG laser irradiation
E.György, A. Pérez del Pino, P.Serra, J.L.Morenza
Applied Surface Science, 222, 415-422 (2004)

In vitro bioactivity of laser ablation pseudowollastonite coating
P.N. De Aza, J.M.Fernández-Pradas, P.Serra
Biomaterials, 25, 1983-1990 (2004)

Coloring of titanium through laser oxidation: comparative study with anodizing
A. Pérez del Pino, J.M.Fernández-Pradas, P.Serra, J.L.Morenza
Surface and Coatings Technology, 187, 106-112 (2004)

Influence of the ambient gas in laser structuring of the titanium surface
E.György, A. Pérez del Pino, P.Serra, J.L.Morenza
Surface and Coatings Technology, 187, 245-249 (2004)

Laser induced forward transfer of biomolecules
J.M.Fernández-Pradas, M.Colina, P.Serra, J.Domínguez, J.L.Morenza
Thin Solid Films, 453-454, 27-30 (2004)

Surface structuring of titanium under pulsed Nd:YAG laser irradiation
E.György, A. Pérez del Pino, P.Serra, J.L.Morenza
ROMOPTO 2003: Seventh Conference on Optics, V.I.Vlad (ed.), Proceedings of SPIE, vol. 5581, pp. 323-332, 2004.

Production of biomolecule microarrays through laser induced forward transfer
J.M.Fernández-Pradas, P.Serra, M.Colina, J.L.Morenza
Fifth International Symposium on Laser Precision Microfabrication, I. Miyamoto, H.Helvajian, K.Itoh, K.F.Kobayashi, A.Ostendorf, K.Sugioka (eds.), Proceedings of SPIE, vol. 5662, pp. 582-585, 2004.

Inhomogeneity of calcium phosphate coatings deposited by laser ablation at high deposition rate
J.M.Fernández-Pradas, G.Sardin, J.L.Morenza
Applied Physics A: Materials Science and Processing, 76, 251-256 (2003)

Laser surface processing of titanium in air: influence of scan traces overlapping
A.Pérez del Pino, P.Serra, J.L.Morenza
Journal of Laser Applications, 15, 120-123 (2003)

Microcolumn development on titanium by multipulse laser irradiation in nitrogen
E.György, A. Pérez del Pino, P.Serra, J.L.Morenza
Journal of Materials Research, 18, 2228-2234 (2003)

Depth profiling characterisation of the surface layer obtained by pulsed Nd:YAG laser irradiation of titanium in nitrogen
E.György, A. Pérez del Pino, P.Serra, J.L.Morenza
Surface and Coatings Technology, 173, 265-270 (2003)

Crown-like structure development on titanium exposed to multipulse Nd:YAG laser irradiation
E.György, I.N.Mihailescu, P.Serra, A. Pérez del Pino, J.L.Morenza
Applied Physics A : Materials Science and Processing, 74, 755-759 (2002)

Surface nitridation of titanium by pulsed Nd:YAG laser irradiation
E.György, A. Pérez del Pino, P.Serra, J.L.Morenza
Applied Surface Science, 186, 130-134 (2002)

Influence of the interface layer on the adhesion of pulsed laser deposited hydroxyapatite coatings on titanium alloy .
J.M.Fernández-Pradas, M.V.García-Cuenca, L.Clèries, G.Sardin, J.L.Morenza
Applied Surface Science, 195, 31-37 (2002)

Growth of surface structures on titanium through pulsed Nd:YAG laser irradiation in vacuum
E.György, A. Pérez del Pino, P.Serra, J.L.Morenza
Applied Surface Science, 197-198, 851-855 (2002)

Oxidation of titanium through Nd:YAG laser irradiation
A. Pérez del Pino, P.Serra, J.L.Morenza
Applied Surface Science, 197-198, 887-890 (2002)

Characterization of calcium phosphate coatings deposited by Nd:YAG laser ablation at 355 nm: infuence of thickness
J.M.Fernández-Pradas, L.Clèries, G.Sardin, J.L.Morenza
Biomaterials, 23, 1989-1994 (2002)

Pulsed laser deposition of pseudowollastonite coatings
J.M.Fernández-Pradas, P.Serra, J.L.Morenza, P.N. De Aza
Biomaterials, 23, 2057-2061 (2002)

Single pulse Nd:YAG laser irradiation of titanium: influence of laser intensity on surface morphology
E.György, I.N.Mihailescu, P.Serra, A. Pérez del Pino, J.L.Morenza
Surface and Coatings Technology, 154, 63-67 (2002)

Coloring of titanium by pulsed laser processing in air
A. Pérez del Pino, P.Serra, J.L.Morenza
Thin Solid Films, 415, 201-205 (2002)

Evolution of the deposition rate during pulsed laser deposition of hydroxyapatite coatings and its relation with target morphology
J.M.Fernández-Pradas, L.Clèries, P.Serra, G.Sardin, J.L.Morenza
Applied Physics A : Materials Science and Processing, 72, 613-618 (2001)

Influence of thickness on the properties of hydroxyapatite coatings deposited by KrF laser ablation
J.M.Fernández-Pradas, L.Clèries, E.Martínez, G.Sardin, J.Esteve, J.L.Morenza
Biomaterials, 22, 2171-2175 (2001)

Structural characterization of laser treated Cr 3 C 2 -NiCr coatings
P.Serra, J.M.Miguel, J.L.Morenza, J.M.Guilemany
Journal of Materials Research, 16, 3416-3422 (2001)

Calcium phosphate coatings deposited by laser ablation at 355 nm under different substrate temperatures and water vapour pressures
J.M.Fernández-Pradas, L.Clèries, E.Martínez, G.Sardin, J.Esteve, J.L.Morenza
Applied Physics A : Materials Science and Processing , 71, 37-42 (2000)

Mechanical properties of calcium phosphate coatings deposited by laser ablation
L.Clèries, E.Martínez, J.M.Fernández-Pradas, G.Sardin, J.Esteve, J.L.Morenza
Biomaterials, 21, 967-971 (2000)

Behavior in simulated body fluid of calcium phosphate coatings obtained by laser ablation
L.Clèries, J.M.Fernández-Pradas, J.L.Morenza
Biomaterials, 21, 1861-1865 (2000)

Bone growth on, and resorption of, calcium phosphate coatings obtained by pulsed laser deposition
L.Clèries, J.M.Fernández-Pradas, J.L.Morenza
Journal of Biomedical Materials Research, 49, 43-52 (2000)

Laser surface treatment of ceramic-metal composite coatings
P.Serra, J.M.Miguel, J.L.Morenza, J.M.Guilemany
Proc. Laser Materials Processing Conference ICALEO 2000, LIA Vol. 89, Laser Institute of America, Orlando, 2000, pp. D194-D198.

Study of the plume generated by Nd:YAG laser ablation of a hydroxyapatite target
P.Serra, J.M.Fernández-Pradas, J.Navarro, J.L.Morenza
Applied Physics A : Materials Science and Processing , 69, S183-S186 (1999)

Surface treatment of titanium by Nd:YAG laser irradiation in the presence of nitrogen
J.C.Mori, P.Serra, E.Martínez, G.Sardin, J.Esteve, J.L.Morenza
Applied Physics A : Materials Science and Processing , 69, S699-S702 (1999)

Characterization of the progressive growth of columns by excimer laser irradiation of silicon
F.Sánchez, J.L.Morenza, V.Trtik
Applied Physics Letters, 75, 3303-3305 (1999)

Application of dissolution experiments to characterise the structure of pulsed laser-deposited calcium phosphate coatings
L.Clèries, J.M.Fernández-Pradas, G.Sardin, J.L.Morenza
Biomaterials, 20, 1401-1405 (1999)

Evidence of chemical reactions in the hydroxyapatite laser ablation plume with a water atmosphere
P.Serra, J.L.Morenza
Journal of Applied Physics, 85, 3289-3293 (1999)

Hydroxyapatite coatings grown by pulsed laser deposition with a beam of 355 nm wavelength
J.M.Fernández-Pradas, L.Clèries, G.Sardin, J.L.Morenza
Journal of Materials Research, 14, 4715-4719 (1999)

Calcium-phosphate coatings on titanium alloy deposited by laser ablation
L.Clèries, E.Martínez, J.M.Fernández-Pradas, G.Sardin, J.Esteve, J.L.Morenza
Proc. of Symposium on Materials in Clinical Applications, 9th CIMTEC-World Ceramics Congress & Forum on New Materials, ed. P.Vincenzini, Techna, Faenza, 1999, pp.199-206

Dynamics of the hydrodynamical growth of columns on silicon exposed to ArF excimer laser irradiation
F.Sánchez, J.L.Morenza, R.Aguiar, J.C.Delgado, M.Varela
Applied Physics A : Materials Science and Processing , 66, 83-86 (1998)

Analysis of hydroxyapatite laser ablation plumes in a water atmosphere
P.Serra, J.L.Morenza
Applied Physics A : Materials Science and Processing , 67, 289-294 (1998)

Imaging and spectral analysis of hydroxyapatite laser ablation plumes
P.Serra, J.L.Morenza
Applied Surface Science, 127-129, 662-667 (1998)

Dissolution behaviour of calcium-phosphate coatings obtained by laser ablation
L.Clèries, J.M.Fernández-Pradas, G.Sardin, J.L.Morenza
Biomaterials, 19, 1483-1487 (1998)

Species resolved analysis of the expansion of hydroxyapatite laser ablation plumes
P.Serra, J.L.Morenza
Journal of Materials Research, 13, 1132-1135 (1998)

Study of material emission in ArF and KrF excimer laser ablation of yttria stabilized zirconia single crystals
F.Sánchez, R.Aguiar, P.Serra, M.Varela, J.L.Morenza
Thin Solid Films, 317, 108-111 (1998)

Deposition of hydroxyapatite thin films by excimer laser ablation
J.M.Fernández-Pradas, G.Sardin, L.Clèries, P.Serra, C.Ferrater, J.L.Morenza
Thin Solid Films, 317, 393-396 (1998)

Fluence dependence of hydroxyapatite laser ablation plumes
P.Serra, J.L.Morenza
Thin Solid Films, 335, 43-48 (1998)

Deposition of hydroxyapatite on Ti-6Al-4V by KrF excimer laser ablation
J.M.Fernández-Pradas, L.Clèries, G.Sardin, J.L.Morenza
24th Annual Meeting of the Society for Biomaterials, San Diego , 1998, Transactions of the Society for Biomaterials, 21, 486 (1998)

  Area of Hard Coatings:

Tribological performance of chromium/chromium carbide multilayers deposited by r.f. magnetron sputtering
Gómez, M.A.; Romero, J.; Lousa, A.; Esteve, J.
Surface & Coatings Technology, In Press, Available online 13 September 2005,

Surface and optical analysis of SiC x films prepared by RF-RMS technique
Mahmood, A.; Muhl, S.; Machorro, R.; Lousa, A.; Esteve, J.; Heiras, J.
Diamond and Related Materials, In Press, Available online 15 August 2005,

Growth vs. nucleation of conducting polymers thin films obtained by plasma-enhanced chemical vapor deposition.
Martin, L.; Esteve, J.; Borrós, S.
Thin Solid Films, 451-452, 74-80 (2004)

Mechanical strength improvement of electrical discharge machined cemented carbides through PVD (TiN, TiAlN) coatings
Casas, B.; Lousa, A.; Calderón, J.; Anglada, M.; Esteve, J.; Llanes, L.
Thin Solid Films, 447-448, 258-263 (2004)

Mechanical properties of nanocomposite and multilayered Cr-Si-N sputtered thin films
Martinez , E.; Sanjinés, R.; Karimi, A.; Esteve, J.; Lévy, F.
Surface & Coatings Technology, 180-181, 570-574 (2004)

Cathodic chromium carbide coatings for molding die applications
Esteve, J.; Romero, J.; Gómez, M.; Lousa, A.
Surface & Coatings Technology, 188-189, 506-510 (2004)

Period dependence of hardness and microstructure on nanometric Cr/CrN multilayers
Romero, J.; Esteve, J.; Lousa, A.
Surface & Coatings Technology, 188-189, 338-343 (2004)

Nanometric chromium nitride/chromium carbide multilayers by r.f. magnetron sputtering
Romero, J.; Martínez, E.; Esteve, J.; Lousa, A.
Surface & Coatings Technology, 180-181, 335-340 (2004)

Preparation and nanoscale mechanical properties of self-assembled carboxylic acid functionalized pentathiophene on mica
Chen, J.; Murphy, A.R.; Esteve, J.; Ogletree, D.F.; Salmeron, M.; Frechet, J.
Langmuir, 20, 7703-7710 (2004)

Wear behavior of nanometric CrN/Cr multilayers
Martínez, E.; Romero, J.; Lousa, A.; Esteve, J.
Surface & Coatings Technology, 163, 571-577 (2003)

Nanometric Chromium/Chromium Carbide Multilayers for tribological applications.
Romero, J.; Lousa, A.; Martínez, E.; Esteve, J.
Surface & Coatings Technology, 163-164, 392-397 (2003)

Effects of carbon incorporation in tungsten carbide films deposited by r.f. magnetron sputtering: single layers and multilayers.
Rincón, C.; Romero, J.; Esteve, J.; Martínez, E.; Lousa, A.
Surface & Coatings Technology, 163-164, 386-391 (2003)

Diamond coatings on electrical-discharge machined hardmetals
Martínez, E.; Casas, B.; Lousa, A.; Esteve, J.; Llanes, L.
Diamond and Related Materials, 12, 762-767 (2003)

Properties of a-C:H films deposited from a methane electron cyclotron wave resonant plasma
Morrison, N.A.; William, C.; Racine, B.; Milne, W.I.; Martínez, E.; Esteve, J.; Andújar, J.L.
Current Applied Physics, 3, 433-437 (2003)

Nanoindentation stress-strain curves as a method for thin film complete mechanical characterization: application to CrN/Cr nanometric multilayer coatings.
Martínez, E.; Romero, J.; Lousa, A.; Esteve, J.
Applied Physics A: Materials Science & Processing, 77, 419-426 (2003)

Tribological performance of TiN supported molibdenum and tantalum carbide coatings in abrasion and sliding contact
Martínez, E.; Wiklund, U.; Esteve J.; Montalà F.; Carreras Ll.
Wear, 253, 1182-1187 (2002)

Formation of cubic boron nitride films by r.f. magnetron sputtering
Jiang, L.D.; Fitzgerald, A.G.; Rose, M.J.; Lousa, A; Gimeno, S.
Surface and Interface Analysis, 34, 732-734 (2002)

Mechanical strengthening in nanometric CrN/Cr multilayers measured by nanoindentation
Martinez , E; Romero, J; Lousa, A; Esteve, J.
Journal of Physics D: Applied Physics, 35, 1880-1883 (2002)

Influence of electrical discharge machining on the sliding contact response of a cemented carbide.
Llanes, L.; Idañez, E.; Martínez, E.; Casas, B.; Esteve, J.
International Journal of Refractory Metals and Hard Materials, 19, 35-40 (2002)

Micromechanical properties of carbon-silica aerogel composites
Moner-Girona, M.; Martínez, E.; Esteve, J.; Roig, A.; Solanas, R.; Molins, E.
Applied Physics A: Materials Science & Processing, 74, 119-122 (2002)

Tungsten Carbide/diamond-like carbon multilayers coatings on steel for tribological applications
Rincón, C.; Zambrano, G.; Carvajal, A.; Prieto, P.; Galindo, H.; Martinez, E.; Lousa, A.; Esteve, J.
Surface & Coatings Technology, 148, 277-283 (2001)

Multilayered Chromium/Chromium Nitride Coatings for use in Pressure Die Casting
Lousa, A.; Romero, J.; Martínez, E.; Esteve, J.; Montalà, F.; Carreras, L.
Surface & Coatings Technology, 146-147, 268-273 (2001)

Influence of electrical discharge machining on the tribological characteristics of WC-Co alloys
Casas, B.; Martinez, E.; Esteve, J.; Anglada, M.; Llanes, L.
Revista de Metalurgia. CENIM, 37, 140-144 (2001)

Analysis of diamond nucleation on molybdenum by biased hot filament chemical vapor deposition
Wang, W.L.; Liao, K.J.; Fang, L.; Esteve, J.; Polo, M.C.
Diamond and Related Materials, 10, 383-387 (2001)

Micromechanical and microtribological properties of BCN thin films near the B 4 C composition deposited by R.F. Magnetron Sputtering.
Martínez, E.; Lousa, A.; Esteve, J.
Diamond and Related Materials, 10, 1892-1896 (2001)

Study of the mechanical properties of tetrahedral amorphous carbon films by nanoindentation and nanowear measurements
Martínez, E.; Andújar, J.L.; Polo, M.C.; Esteve, J.; Robertson, J.; Milne, W.I.
Diamond and Related Materials, 10, 145-152 (2001)

Quantification of ion bombardment effects in c-BN thin films deposited by rf magnetron sputtering
Lousa, A; Gimeno, S.
Diamond and Related Materials, 10, 1347-1351 (2001)

Amorphous Si x C 1-x films: an example of materials presenting low indentation hardness and high wear resistance
Esteve J, Lousa A, Martinez E, Huck H, Halac EB, Reinoso M.
Diamond and Related Materials, 10, 1053-1057 (2001)

Influence of thickness on the properties of hydroxyapatite coatings deposited by KrF laser ablation
Fernández-Pradas, J.M.; Clèries, L.; Martínez, E.; Sardin, G.; Esteve, J.; Morenza, J.L.
Biomaterials, 22, 2171-2175 (2001)

Surface analysis of nanoestructured ceramic coatings containing silicon nitride and silicon carbide nanoparticles produced by plasma modulation chemical vapor deposition
Bertran, E.; Viera, G.; Martínez, E.; Esteve, J.; Fargas, J.; Roura, P.
Thin Solid Films, 377-378, 495-500 (2000)

Mechanical and tribological properties of tungsten carbide sputtered coatings
Esteve, J.; Zambrano, G.; Rincon, C.; Martínez, E.; Galindo, H.; Prieto, P.
Thin Solid Films, 373, 282-286 (2000)

Improvement of hardness in plasma polymerized hexamethyldisiloxane coatings by silica-like surface modification
Benítez, F.; Martínez, E.; Esteve, J.;
Thin Solid Films, 377-378, 109-114 (2000)

Mechanical properties of plasma deposited polymer coatings
Benitez, F.; Martinez , E.; Galán, M.; Serrat, J.; Esteve, J.
Surface & Coatings Technology, 125, 383-387 (2000)

Microtribological characterization of group V and VI metal-carbide wear-resistant coatings effective in the metal casting industry
Esteve, J.; Martinez, E.; Lousa, A.; Montala, F.; Carreras, L.L.
Surface & Coatings Technology, 133-134, 314-318 (2000)

Mechanical properties of silica aerogels measured by microindentation: influence of sol-gel processing parameters and carbon addition
Moner-Girona, M.; Martinez, E.; Roig, A.; Esteve, J.; Molins, E.
Journal of Non-Crystalline Solids, 285, 244-250 (2000)

Influence of electrical discharge machining on the sliding contact response of cemented carbides
Llanes, L.; Idañez, E.; Martinez, E.; Casas, B.; Esteve, J.
International Journal of Refractory Metals and Hard Materials, 119, 35-40 (2000)

BCN thin films near the B 4 C composition deposited by r.f. magnetron sputtering
Lousa, A.; Esteve, S.; Muhl, S.; Martínez, E.
Diamond and Related Materials, 9, 502-505 (2000)

Step-by-step simulations of diamond nucleation and growth on silicon (001) surfaces
Zhang, R.Q.; Bertran, E.; Wang, W.L.; Esteve, J.; Lee, S.T.
Diamond and Related Materials, 9, 146-155 (2000)

Synthesis of cubic aluminum nitride by carbothermal nitridation reaction
Wang, J.; Wang, W.L.; Ding, P.D.; Yang, Y.X.; Fang, L.; Esteve, J.; Polo, M.C.; Sanchez, G.
Diamond and Related Materials, 8, 1342-1344 (2000)

Mechanical properties of calcium phosphate coatings deposited by laser ablation
Clèries, L.; Martínez, E.; Fernández-Pradas, J.M.; Sardin, G.; Esteve, J.; Morenza, J.L.;
Biomaterials, 21, 967-971 (2000)

Characterisation of cubic boron nitride films at different stages of deposition
Jiang, L.D.; Fitzgerald, A.G.; Rose, M.J.; Lousa, A.; Gimeno, S.
Applied Surface Science, 167, 89-93 (2000) ,

Calcium-phosphate coatings deposited by laser ablation at 355 nm under different substrate temperatures and water vapour pressures
Fernández-Pradas, J.M.; Clèries, L.; Martínez, E.; Sardin, G.; Esteve, J.; Morenza, J.L.
Applied Physics A: Materials Science & Processing, 71, 37-42 (2000)

Nanoindentation hardness measured using real-shape indenters: application to extremely hard and elastic materials
Martínez, E.; Esteve, J.
Applied Physics A: Materials Science & Processing, 72, 319-324 (2000)

Diamond and diamond-like carbon films
Esteve, J.; Polo, M.C.; Sánchez, G.
Vacuum, 52, 133-139 (1999)

Effect of ion bombardment on the properties of B 4 C thin films deposited by RF sputtering
Lousa, A.; Martínez, E.; Esteve, J.; Pascual, E.
Thin Solid Films, 355-356, 210-213 (1999)

Preservation of cooper against atmospheric corrosion with a film obtained by plasma polymerization of methane
Borros, S; Picazo, L; Esteve, J.
Journal de Physique IV, 9, 479-486 (1999)

Plasma polymer thin films obtained by plasma polymerization of pyrrole
Borros, S; Picazo, L; Ferrer-Anglada, N; Takhtoukh, Y; Esteve,J.
Journal de Physique IV, 9, 461-469 (1999)

Substrate temperature effects on the microhardness and adhesion of diamond-like thin films
Martínez, E.; Polo, M.C.; Pascual, E.; Esteve, J.
Diamond and Related Materials, 8, 563-566 (1999)

Micromechanical properties of BN and B-C-N coatings obtained by r.f. plasma-assisted CVD
Polo, M.C.; Martinez , E.; Esteve, J.; Andújar, J.L.
Diamond and Related Materials, 8, 423-427 (1999)

Boron carbide thin films deposited by tuned-substrate RF magnetron sputtering
Pascual, E.; Martinez, E.; Esteve, J.; Lousa, A.
Diamond and Related Materials, 8, 402-405 (1999)

Mechanism of diamond nucleation enhancement by electron emission via hot filament chemical vapor deposition
Wang, W.L.; Liao, K.J.; Wang, J.; Fang, L.; Ding, P.D.; Esteve, J.; Polo, M.C.; Sánchez, G.
Diamond and Related Materials, 8, 123-126 (1999)

Micromechanical properties of silica aerogels
Moner-Girona, M.; Roig, E.; Molins, E.; Martínez, E.; Esteve, J.
Applied Physics Letters, 75, 653-655 (1999)

Surface treatment of titanium by Nd:YAG laser irradiation in the presence of nitrogen
Mori, J.C.; Serra, P.; Martínez, E.; Sardin, G.; Esteve, J.; Morenza, J.L.
Applied Physics A: Materials Science & Processing, 69, S699-S702 (1999)

Molecular mechanics simulation of the diamond nucleation and growth on silicon (001) and (111) surfaces
Zhang, R.Q.; Wang, W.L.; Esteve, J.; Bertran, E.
Thin Solid Films, 317, 6-9 (1998)

Deposition time influence on cubic boron nitride thin films by tuned rf magnetron sputtering
Gimeno, S.; Munoz, J.C.; Lousa, A.
Thin Solid Films, 317, 376-379 (1998)

Hardness and morphological characterization of tungsten carbide thin films
Zambrano, G.; Prieto, P.; Perez, F.; Rincón, C.; Gal indo, H.; Cota-Azaira, L.; Esteve, J.; Martinez, E.
Surface & Coatings Technology, 108-109, 323-327 (1998)

YSZ protective coatings elaborated by MOCVD on nikel-based alloys
Martinez, E.; Esteve, J.; Garcia, G.; Figueras, A.; Llibre, J.
Surface & Coatings Technology, 100-101, 164-168 (1998)

Adherence experiments on cBN films
Gimeno, S.; Munoz, J.C.; Lousa, A.
Diamond and Related Materials, 7, 853-857 (1998)

Piezoresistivity of p-type heteroepitaxial diamond films on Si(100)
Wang, W.L.; Liao, K.J.; Sánchez, G.; Polo, M.C.; Esteve, J.
Diamond and Related Materials, 7, 528-532 (1998)

Preparation of B-C-N thin films by r.f. plasma assisted CVD
Polo, M.C.; Martínez, J.; Esteve, J.; Andújar, L.
Diamond and Related Materials, 7, 376-379 (1998)

Nucleation of diamond on silicon by bias assisted HFCVD: a comparative study
Sánchez, G.; Wang, W.L.; Polo, M.C.; Esteve, J.
Diamond and Related Materials, 7, 200-204 (1998)